10-05-2007 03:07 AM - edited 03-03-2019 07:02 PM
Hai,
I have a dout regarding LDP in MPLS,is here any commands which i can see the LDP status (Any show command) Please help me regarding this.I am running the IOS version 12.2(17r)S2.
Thanks in advance
10-05-2007 03:37 AM
Use show mpls interfaces
It should show you whether the tunnel is operational or not
http://www.cisco.com/en/US/tech/tk436/tk428/technologies_tech_note09186a0080094b4e.shtml
HTH
Narayan
10-05-2007 10:11 PM
Hai,
Thanks Mr.Narayan i can see both commands output are showing the same (Unfortunatly i am not having the access to exicute the command (show tag-switching tdp discovery)
XXXX#show tag-switching interfaces
Interface IP Tunnel Operational
GigabitEthernet1/1 Yes (ldp) No Yes
GE-WAN1/4 Yes (ldp) Yes Yes
XXXXX#show mpls interfaces
Interface IP Tunnel Operational
GigabitEthernet1/1 Yes (ldp) No Yes
GE-WAN1/4 Yes (ldp) Yes Yes
Lijesh.N.C
Bharti Airtel Bangalore
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide