Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

MPLS

Hai,

I have a dout regarding LDP in MPLS,is here any commands which i can see the LDP status (Any show command) Please help me regarding this.I am running the IOS version 12.2(17r)S2.

Thanks in advance

2 REPLIES

Re: MPLS

Use show mpls interfaces

It should show you whether the tunnel is operational or not

http://www.cisco.com/en/US/tech/tk436/tk428/technologies_tech_note09186a0080094b4e.shtml

HTH

Narayan

New Member

Re: MPLS

Hai,

Thanks Mr.Narayan i can see both commands output are showing the same (Unfortunatly i am not having the access to exicute the command (show tag-switching tdp discovery)

XXXX#show tag-switching interfaces

Interface IP Tunnel Operational

GigabitEthernet1/1 Yes (ldp) No Yes

GE-WAN1/4 Yes (ldp) Yes Yes

XXXXX#show mpls interfaces

Interface IP Tunnel Operational

GigabitEthernet1/1 Yes (ldp) No Yes

GE-WAN1/4 Yes (ldp) Yes Yes

Lijesh.N.C

Bharti Airtel Bangalore

93
Views
0
Helpful
2
Replies
CreatePlease to create content