Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

MR-APS (SONET) on GSR Vs. Alcatel 1660

Hi, guys!

We have a GSR 12006 as an Edge PE, we are implementing APS for SONET controllers, the APS is between the GSR and an Alcatel?s 1660 ADM..

The problem is that everything is well configured, ie:

controller SONET 1/1/0

ais-shut

framing sdh

clock source line

overhead j0 1

aug mapping au-4

...

<snip>

...

aps group 10

aps working 1

description WORKING GROUP10

!

controller SONET 2/1/0

ais-shut

framing sdh

clock source line

overhead j0 1

aug mapping au-4

...

<snip>

...

aps group 10

aps protect 1 192.168.54.59

description PROTECT GROUP10

!

The problem is that we are not seeing the GSR negotiating K1K2?s values, we don?t change anything about configuration on the ADM nor GSR, but everything works after reloading the GSR!

I mean, anything works but reloading the GSR, i dont know if this could be caused because we are changing the framing to SDH (Mexico) instead SONET, and when we do that, the SPA gets reloaded..or i dont know which could be the cause of this misbehavior

Any of you have had this kind of problem?

Kind Regards

235
Views
0
Helpful
0
Replies
CreatePlease to create content