I was talking to another guy yesterday late in my team, we were talking about multi vrf's but he kept on mentioning ASBR and I did not understand. according to my understanding an asbr is associated with ospf and it's the router that connects to the outside world/network, when I asked him he just smiled and leave. Do you have any idea about the relation between the asbr and multi vrf ce.
I still don't understand because I thought a CE is concentrating towards the customer LAN on one side and towards the pe on the other side? whilst ASBR is more like a gateway to the outside world on one side and on the other side is connected to the core network or the PE side?
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...