I have an issue. Hub Rtr --> Edge Rtr Point to Point Subs Frame Relay. Every 4 minutes the host sends two Multicast packets. First one is very small and the second trails by spilt seconds and is not much larger. Issue, I debug and can see the first packet sent out egress sub-interfaces to the edge but I do not see the second packet replicate at all.
I can provide more detail if need be, this seems to be an unique situation for me.
NOTE: If I disable fast switching on both sides it works. makes no sense. I need to run in the most optimal level as possible.
Let me know your thoughts, ideas or solutions.....
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...