In our network we have segregated into two network segments i.e CUST_A and CUST_B.Sevice like IPTV,VOIP,and data are provided.The problem is when we create a SHARED vrf internet works but IPTV does not work.Please provide us an alternate solution wherein we can have IPTV run in SHARED mode.
the hardware acceleration feature should be only an optimization of the forwarding plane.
Unless you are facing a performance issue you should be fine with your current release.
By the way, we had to upgrade to 12.2(33)SXH because 12.2(18)SXF doesn't support well the 8 Tengiga linecard WS-6708.
We have upgraded a whole campus some mounths ago with no issue.
To be noted that 12.2(33)SXH introduces the mdt address family under BGP multiprotocol so there is a big change also in multicast signalling features.
If you like you can provide more details of your issue in the forum or you can plan an upgrade on some PE nodes and look to see if the behaviour changes.
there also the declared restrictions to be taken in account:
Restrictions for Configuring Multicast VPN Extranet Support
â¢The Multicast VPN Extranet Support feature only supports Protocol Independent Multicast (PIM) sparse mode (PIM-SM) and Source Specific Multicast (SSM) traffic; PIM dense mode (PIM-DM) and bidirectional PIM (bidir-PIM) traffic are not supported.
â¢When configuring extranet MVPNs in a PIM-SM environment, the source and the rendezvous point (RP) must reside in the same site of the MVPN behind the same provider edge (PE) router.
these are from the document I've linked in my first post.
Our network has L3 switch where all the services have been terminated.CCM for Voice,MCU and IPTV for Video,and internet and intra net for data.
we have to segment(segregate) the network into two as of today(might change) and are going to avail these services.
There are 2 parent nodes which connect 5 routers from north and 6 routers from south respectively.
The problem is when try to make L3 as a PE node (making all the services in shared vrf)the IPTV service is not working.secondly,voice communication between two VRF's(inter VRF) does'nt happen(in our case must work).thirdly monitoring each device through NMS becomes difficult.
Please help.I will provide you the network diagram soon!!
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...