03-08-2012 11:20 PM - edited 03-04-2019 03:36 PM
I have a 2921 with a
SM-ES3G-24-P module.
On the module switch I dont have an option to put "ip pim sparse-dense-mode" under the Interface Vlan 2. All I can do is put it in passive mode.
Any reason why?
!
Interface Vlan 2
ip address 10.10.2.1 255.255.255.0
<no option here>
!
03-09-2012 07:03 AM
Did you install the 'IP Services' license on the module?
It is separate from the router's license.
Regards,
Edison
03-09-2012 08:31 AM
Not consoled to check IP services license module, but I was earlier able to add ip pim sparse-dense-mode on the nearby Gig interface on switch. Only option I seem to have in config-if mode under interface vlan 2 is ip pim passive. Odd.
2921 with SM-ES3G-24-P
Image 12.2.52EX1 C3560e-univerisalk9-m
03-09-2012 08:38 AM
Someone sent me sh ver output.
switch#show version
Cisco IOS Software, C3560E Software (C3560E-UNIVERSALK9-M), Version 12.2(52)EX1,
RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Thu 13-May-10 14:25 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x02400000
ROM: Bootstrap program is C3560E boot loader
BOOTLDR: C3560E Boot Loader (C3560E-HBOOT-M) Version 12.2(52r)EX, RELEASE SOFTWA
RE (fc1)
groundWave-switch uptime is 1 week, 1 day, 18 hours, 8 minutes
System returned to ROM by power-on
System restarted at 22:22:07 UTC Wed Feb 29 2012
System image file is "flash:/c3560e-universalk9-mz.122-52.EX1.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
License Level: ipbase
License Type: Default. No valid license found.
Next reload license Level: ipbase
cisco SM-ES3G-24-P (PowerPC405) processor with 131072K bytes of memory.
Processor board ID FOC15445XQX
Last reset from power-on
3 Virtual Ethernet interfaces
26 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 08:D0:9F:59:01:00
Motherboard serial number : FOC15445XQX
Model number : SM-ES3G-24-P
System serial number : FOC15445XQX
Hardware Board Revision Number : 0x00
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 26 SM-ES3G-24-P 12.2(52)EX1 C3560E-UNIVERSALK9-M
switch#
03-09-2012 02:07 PM
The license level is IP Base, you need IP Services for multicast routing.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: