I like to configure sparse-dense mode ( when RP is failed, let dense mode work) over FR hub and stroke(no subinterface allowed), router A is hub and router B,C are spokes, by configuring router A as BSR and using PIMv2, the RP mapping issue is cleared, but router A has RPF issue, can't forward multicast packet to spokes, because FR is not available multicast nature on multipoint FR interface(NBMA), how can i fix this problem?
While trying to transfer multicast packets to spokes, what error message do u receive?.Send me the debug o/p from the hub router.If u send it, it will be really useful for me to trace out the problem. Also, let me know what router's u use as hub and spoke
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...