My issue is i have created two vlans in 4948 core switch one for servers and other for systems(users) . We have created access ports for server vlan in core switch itself and connected the servers in those ports and trunks have configured between coreswitches and access switches to be connected to users,and we have enabled intervlan routing .Now there are some users having software clients which need multicast updates from a particular server. But since all the servers and systems are in seperate vlans multicast packets are not coming to clients . can any one send me a configuration and explain the same how to implement that for this kind of scenario.
here does that 10.1.1.1 refer to the multicast ip address(example) ?
because the server vlan is in 172.16.0.254 and users/system vlan is in 172.16.100.254 both /24 .
With PIM sparse mode you need an RP (Rendevous Point). The recommendation is to use a loopback address. The loopback address can be any IP you want, Giuseppe just chose 10.1.1.1 as an example. The RP address does not need to be from either the server or client vlan.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.