Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Multicaste Routing

Please help in creating config template for a multicaste routing.

From Server: 192.168.11.12

Multicaste address:239.0.0.1/5000

To seven different Branch offices

1.172.16.0.0/24

2.192.168.201.0/24

3.192.168.10.0/24

4.192.168.11.0/24

5.192.168.12.0/24

6.192.168.13.0/24

7.10.239.239.20/24

1 REPLY

Re: Multicaste Routing

Hi

if branches are WAN connected u need to:

1-configure PIM all devices carrying traffic to ur branches from HQ site.

2-decide on which PIM mode u need sparse or dense ( maybe sparse-dense if u will use autodiscovery RP).

3-choose an RP is u choose sparse mode.

4-make sure there is a route for teh source.

Once you do this, multicast will be forwarded to ur branches regardless of Multicast address.

I suggest you read up a bit more on Multicast configuration, it shoudl be straightforward.

http://www.cisco.com/en/US/tech/tk828/technologies_tech_note09186a0080094821.shtml

HTH

Sam

99
Views
0
Helpful
1
Replies