Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

multilink config problem on 2811 router

Hi,all

Thanks in advance.

is their any ios restriction for configuring multilink config on router 2811? i mean can i config multilink on ipbase 2811 router or i have to upgrade the ios version?

3 REPLIES
Cisco Employee

Re: multilink config problem on 2811 router

You can use Feature navigator tool to check the feature availability.

www.cisco.com/go/fn

HTH,

Nagendra

Re: multilink config problem on 2811 router

Hi,

IPbase have a lot of restrictions and will not be able to used for fullest. Also what is the ios verison you want.

I would recommend advance service ios. Depending on your requirements.

Regards,

Pravin

Re: multilink config problem on 2811 router

Hi San,

As far as I know Multilink PPP does not requires any specific feature set. It should work fine with IP Base.

-> Sushil

122
Views
0
Helpful
3
Replies
CreatePlease login to create content