multilink config question

[sultanfaisal]

Dears,

I have two routers pointing to each other (point to point router)

The  connections type between this routers is E1 (2mbps) now I have on one  of the routers extra E1 (10mbps) and I want to make the bandwidth  between this routers (12mbps)

In the attached diagram you will see my routers and interfaces.(on router2 fa0/0 will have the 10mbps)

Do you think Multilink technology will let me have this speed tighter and how can I configure it.

Thanks.

[CSCO11508096]

hi,

I guess, In multilink you can not bind ethernet interface with serial port......

[sultanfaisal]

how can confirm this please

[CSCO11508096]

yes, it is sure...

at ethernet interface we use link aggregation (etherchannel) and for serial we use multilink...

PPP and HDLC protocols are specially  desigend for this

[Naresh Pochamaneni]

Multilink configuration works only on Serial Interfaces.

[sultanfaisal]

ok guys thanks alot