We have some spoke sites connected to HUB location. All the sites are having 2 E1 links which are bundled via Multilink. The issue is when we pump traffic on it the CRC and errors on both the links at spoke site increases and when we unbundled the links it works fine. Also when we ping even with heavy size packet there is no drop, no crc and no errors increases. Also the provider as given the clean chit.
What could be the issue. I have attached the config file.
Yea, it can be a clocking issue. I've run into this before when using dual port VWIC cards. In my case it was a matter of setting the first ports clock source to line, and the second port to internal. Just co-ordinate this with your carrier so that everything matches up.
I use MLPPP at all of my sites... Your configuration should look something like this.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.