We have a real doozy of a problem here. 2 T1's one side on a 2800 router, the other end on different DS3's on the same 7200 router. We have done this with other sites with no problems, but this one has us stumped. One T1 is missing the PPP keepalives, and causes the multilink to flap and not work. The T1 is testing 100% clean, both directions CSU to CSU. No errors at all, but every minute, it misses 5 keepalives and drops protocol, renegotiates, and comes back up. Right now I have it as a single PtP T1 with IP's at both ends, and I can slam it with max bytes forever, and only when the LCP drops do I lose packets, but again, no errors. When brought into the multilink though, massive errors, both on the T1 and the multilink.
Anyone give me an idea what to look for next? The only thing I can think of is a misprovisioned circuit, but there are no errors.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.