cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
273
Views
0
Helpful
1
Replies

Multilink PPP with rtp compression

patcbr600
Level 1
Level 1

Hello,

Does any one know if 12.3.11.T6 has any issues regarding configurations with multilink ppp and llq with rtp header compression:

policy-map QUEUE-QPM_GCRMV256

description Politica Gestao Congestao Sites VoIP 256K

class QUEUE-VOICE_RTP_TRAFFIC

priority 64

compress header ip rtp

class QUEUE-VOICE_SIGNA_FACILI

bandwidth percent 4

class QUEUE-QPM_FGCBusi2

bandwidth percent 35

class class-default

fair-queue

interface Multilink1

bandwidth 256

ip address 172.17.75.2 255.255.255.0

service-policy output QUEUE-QPM_GCRMV256

load-interval 30

no cdp enable

ppp multilink

ppp multilink fragment delay 10

ppp multilink interleave

ppp multilink group 1

Thanks in advance.

1 Reply 1

spremkumar
Level 9
Level 9

hi

do revert wht kinda probs you are facing with the rtp compression also post the relevant config related to class-maps defined under policy map.

Also any specific reason or any techinical spec being followed n your network to have this compression techinique in place ?

do confirm whether you have similar kinda configs outthere in the remote end too if its a point to point connectivity ?

regds

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: