Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Multilink PPP with rtp compression

Hello,

Does any one know if 12.3.11.T6 has any issues regarding configurations with multilink ppp and llq with rtp header compression:

policy-map QUEUE-QPM_GCRMV256

description Politica Gestao Congestao Sites VoIP 256K

class QUEUE-VOICE_RTP_TRAFFIC

priority 64

compress header ip rtp

class QUEUE-VOICE_SIGNA_FACILI

bandwidth percent 4

class QUEUE-QPM_FGCBusi2

bandwidth percent 35

class class-default

fair-queue

interface Multilink1

bandwidth 256

ip address 172.17.75.2 255.255.255.0

service-policy output QUEUE-QPM_GCRMV256

load-interval 30

no cdp enable

ppp multilink

ppp multilink fragment delay 10

ppp multilink interleave

ppp multilink group 1

Thanks in advance.

1 REPLY

Re: Multilink PPP with rtp compression

hi

do revert wht kinda probs you are facing with the rtp compression also post the relevant config related to class-maps defined under policy map.

Also any specific reason or any techinical spec being followed n your network to have this compression techinique in place ?

do confirm whether you have similar kinda configs outthere in the remote end too if its a point to point connectivity ?

regds

135
Views
0
Helpful
1
Replies