06-17-2008 08:14 AM - edited 03-03-2019 10:23 PM
I have one 7206 vxr and 3845 routers ..in between 2 E1s i am trying to add into multigroup interface .
but after giving membership to serial interface E1s goes down and interface multilink status is down down .
Can someone please help me :
Here is the config which i doing
Intface multilink 3
ppp multilink
encapsulation ppp
serial0/1:0
ppp multilink
encapsulation ppp
ppp multilink group 3
same for other link as router .
06-17-2008 08:24 AM
ajay,
May this link can help you.
http://www.cisco.com/en/US/tech/tk713/tk628/technologies_configuration_example09186a00800a5efa.shtml
HTH
Thot
06-17-2008 08:45 AM
Thanks ...what be will be diffrence if i give
# multilink-group 1 or # ppp multilink group 1 under interface .
Please help.
06-17-2008 07:10 PM
the logical multilink interface should also need "ppp multilink group 3 "
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide