Multiple ISP bandwidth use same time in 3845 router with BGP
Dear Experts & Giuseppe ,
I need help very urgent , I have 3845 router working with 45 MB bandwith from ISP-1 . this bandwithd utilization very high almost upto 45mb used,
So that's why we are purchased and configure anather 25 MB bandwidth from 2nd anather ISP-2 in this same router.
pl see my bellow configuration, i have facing some problem , the problem is when both ISP's Bandwidth working same time that time my 45MB bandwidth comes down from 45Mb to 27 mb and my 2nd bandwdith uses 25 mb full total 50 mb bandwidth uses only when both bandwidth use at a time.
but i have total 70 mb bandiwidth i need to use total 70 mb bandwitdh so how can i use what is the configuration need to configure in 3845 router ??
PROBLEM WHEN BOTH BANDWIDTH USED SAME TIME THAT TIME ISP-1 45MB BANDWIDTH COMES DOWN UPTO 25 MB I DONT DO THIS I NEED WHEN ISP-1 45 MB BANDWITH USED FULL THEN ISP-2 BANDWIDTH COMES UP TO USE OTHERWISE TOTAL 70 MB BANDWITH USED UNEQUAL COST SAME TIME.
pl see my running BGP configuration templates.
version 12.4 service timestamps debug datetime msec localtime show-timezone service timestamps log datetime msec localtime show-timezone service password-encryption service sequence-numbers ! hostname abc ! boot-start-marker boot-end-marker ! logging message-counter syslog logging buffered 51200 warnings enable secret Connectbvn1 ! no aaa new-model clock timezone Chennai 5 30 ! dot11 syslog no ip source-route no ip gratuitous-arps ! ! ip cef ! ! ip domain name sancharonline.net ip name-server 18.104.22.168 ip name-server 22.214.171.124 multilink bundle-name authenticated ! ! ! ! ! !
archive log config hidekeys ! ! ip ssh version 1 ! ! ! interface GigabitEthernet0/0 description *** WAN From ISP-1 *** ip address 126.96.36.199 255.255.255.252 ip access-group Virus-Block in ip access-group Virus-Block out duplex auto speed auto !no shut
interface GigabitEthernet0/1 description *** Connect to Cisco 3750 *** no ip address ip access-group Virus-Block in ip access-group Virus-Block out duplex auto speed auto no shut ! interface GigabitEthernet0/1.1 encapsulation dot1Q 1 native ip access-group Virus-Block in ip access-group Virus-Block out ! interface GigabitEthernet0/1.2 encapsulation dot1Q 2 ip address 188.8.131.52 255.255.252.0 ip address 184.108.40.206 255.255.255.128 secondary ip address 220.127.116.11 255.255.255.192 secondary ip address 18.104.22.168 255.255.255.0 secondary ip access-group Virus-blok in ip access-group Virus-Block out
description WAN from ISP-2
ip address 22.214.171.124 255.255.255.252
ip access-group Virus-Block in ip access-group Virus-Block out duplex auto speed auto no shut
ip as-path access-list 10 permit ^$ ip http server ip http authentication local no ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 i ip route 0.0.0.0 0.0.0.0 126.96.36.199 ip route 0.0.0.0 0.0.0.0 188.8.131.52 ! ip access-list extended Virus-Block deny tcp any any eq 135 deny udp any any eq 135 deny udp any any eq netbios-ns deny udp any any eq netbios-dgm deny tcp any any eq 139 deny udp any any eq netbios-ss deny tcp any any eq 445 deny tcp any any eq 593 deny tcp any any eq 4444 permit ip any any ! access-list 10 permit 184.108.40.206 0.0.0.255 access-list 10 permit 220.127.116.11 0.0.0.255 access-list 10 permit 18.104.22.168 0.0.0.255 access-list 10 permit 22.214.171.124 0.0.3.255 access-list 11 permit 0.0.0.0 route-map PREVENT-TRANSIT permit 10 match ip address 10 match as-path 10 ! route-map AS-10101-OUTGOING permit 10
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...