Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

NAT 1 to 1 and 1 to Many?

We have 32 static IP from our ISP.

All of these are NAT 1-->1 from FastEthernet 0/1 to FastEthernet 0/0. However, now we need to have one of the static IP's to many (NAT 1-->many) from FastEthernet 0/1 to FastEthernet 1/0.

Currently 1-1 NAT is done by:

FastEth 0/1 FastEth 0/0

192.168.x.10 --> 217.x.x.74

192.168.x.11 --> 217.x.x.75

...

FastEth 1/0 has DHCP IP range from 10.0.1.0/255.255.255.0

How do we NAT 1--many

FastEth 1/0 FastEth 0/1

10.0.1.0/255.255.255.0 --> 217.x.x.80

Ruben

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: NAT 1 to 1 and 1 to Many?

Ruben,

You can accomplish this with NAT overload (commonly known as Port Address Translation or PAT.)

access-list 10 permit 10.0.1.0 0.0.0.255

!

int fa1/0

ip address 10.0.1.x 255.255.255.0

ip nat inside

!

int fa0/1

ip address 217.x.x.80 255.255.255.x

ip nat outside

!

ip nat inside source list 10 interface fa0/1 overload

This should get you started.

HTH

Dean

1 REPLY
New Member

Re: NAT 1 to 1 and 1 to Many?

Ruben,

You can accomplish this with NAT overload (commonly known as Port Address Translation or PAT.)

access-list 10 permit 10.0.1.0 0.0.0.255

!

int fa1/0

ip address 10.0.1.x 255.255.255.0

ip nat inside

!

int fa0/1

ip address 217.x.x.80 255.255.255.x

ip nat outside

!

ip nat inside source list 10 interface fa0/1 overload

This should get you started.

HTH

Dean

102
Views
0
Helpful
1
Replies
CreatePlease login to create content