Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

NAT and routing issue

we have a CE router connecting with a PE router, and we were given a public IP, 33.33.33.33 for example. On the PE router, the servie provider just specify a IP route:"ip route 33.33.33.33 255.255.255.255 172.16.1.1" in which, 172.16.1.1 is my CE router IP address.

On the CE router, I configure NAT like that

"ip nat inside source static 192.168.1.1 33.33.33.33"

Now we like to implement BGP between CE and PE, how to make the NAT still work?

I proposed the configure on the CE, not sure whether it works or not:

"ip route 33.33.33.33 255.255.255.255 null0

router bgp 65000

neighbour 172.16.1.2 remote-as 7070

network 33.33.33.33 mask 255.255.255.255"

1 REPLY

Re: NAT and routing issue

Hi,

It should work, according to the NAT order of operation the incoming packet will be NATed back to your inside ip, before using the null route, accordingly it should work, give it a try and feedback us.

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080133ddd.shtml

HTH, please rate if it does help using the below scroll box,

Mohammed Mahmoud.

105
Views
4
Helpful
1
Replies
CreatePlease login to create content