Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

NAT IP Address into Payload (PIX 525)

Hi

Recently a third party has begun to have problems with FTP and has informed me the NAT'd IP address is not being encapsulated into the Payload of each packet.  I'm not entirely sure on how this could be configured on the PIX firewall?

Scenario:

PCs on the LAN connect to FTP server outside (Active FTP).  Apparently the NAT'd address is only appearing in each packet header and not the Payload.

Details of firewall:

Cisco PIX Security Appliance Software Version 8.0(4)
Device Manager Version 6.1(3)
System image file is "flash:/PIX804.BIN"
Hardware:   PIX-525

If anyone is able to advise how to change this on ASDM that would be great!

Many thanks.

1 REPLY
Cisco Employee

Re: NAT IP Address into Payload (PIX 525)

Hello,

Do you have "inspect ftp" enabled? If not, please try the following:

https://www.cisco.com/en/US/docs/security/asdm/6_1/user/guide/svcrules.html#

wp1165659

Hope this helps.

Regards,

NT

159
Views
0
Helpful
1
Replies