Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

NAT issue

dears

i want to replace the destination addres of a packet by another destination , if that possible i want to have sample of configuration ( i have router 3640

2 REPLIES
Purple

Re: NAT issue

Try the following:

interface

ip nat inside

!

interface

ip nat outside

!

ip nat outside source static

Also be sure that you have a route to the external(NATTED) address on your router or this will not work.

Regards,

Paresh

Re: NAT issue

Hi,

you can use the "ip nat inside destination" command.

Have a look at

"Cisco IOS Network Address Translation Overview"

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_white_paper09186a0080091cb9.shtml

or at

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_command_reference_chapter09186a0080238b73.html#wp1164300

Hope this helps

Martin

129
Views
0
Helpful
2
Replies
CreatePlease to create content