I have a question regarding NAT. Is it possible to apply two NAT rules, if yes, will it increase CPU utilization, have you applied in real traffic? My scenario is simple. I have two ISP connections, and I want using nat to route traffic for a particular subnet through first isp, and other subnet through second isp.
! ip nat inside source list 10 interface FastEthernet0/0 overload ip nat inside source list 20 interface FastEthernet0/1 overload ! access-list 10 permit ip host 192.168.10.100 any access-list 10 deny ip any any ! access-list 20 deny ip host 192.168.10.100 any access-list 20 permit ip 192.168.10.0 0.0.0.255 any access-list 20 deny ip any any !
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.