Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

NAT

Need suggestions to resolve this issue. Thanks

Hi, i have configured static nat on cisco 2811 router, I am unable to access the statically nat ip address from the LAN.

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: NAT

Hello,

from where are you trying that static NAT IP ? You mention you are unable to access from the LAN. Is the LAN on the "inside" or the "outside" of the NAT router ? What is the exact router configuration ?

For the record, if you are trying to access the configured global static IP address from the a machine on the "inside", the router will not be able to "route" that request from the inside interface to the inside interface. Devices on the inside should use the inside local address for that machine.

Regards

1 REPLY
Cisco Employee

Re: NAT

Hello,

from where are you trying that static NAT IP ? You mention you are unable to access from the LAN. Is the LAN on the "inside" or the "outside" of the NAT router ? What is the exact router configuration ?

For the record, if you are trying to access the configured global static IP address from the a machine on the "inside", the router will not be able to "route" that request from the inside interface to the inside interface. Devices on the inside should use the inside local address for that machine.

Regards

264
Views
0
Helpful
1
Replies
CreatePlease to create content