08-17-2008 02:38 AM - edited 03-03-2019 11:10 PM
Hai,
I was goin tru the notes (http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=WAN%2C%20Routing%20and%20Switching&topicID=.ee71a06&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.2cbee68c/0#selected_message)
i had tried to config the same but giving the error message
R2(config-if)#ip nat inside
*Mar 1 00:58:01.083: %LINEPROTO-5-UPDOWN: Line protocol on Interface NVI0, chan
ged state to up
% NBAR ERROR: parsing stopped
% NBAR Error : Activation failed due to insufficient dynamic memory
% NBAR Error: Stile could not add protocol node
%NAT: Error activating CNBAR on the interface Loopback1
R2(config-if)#
R2(config-if)#
*Mar 1 00:58:06.131: %SYS-2-MALLOCFAIL: Memory allocation of 10260 bytes failed
from 0x813AD218, alignment 0
Pool: Processor Free: 25548 Cause: Memory fragmentation
Alternate Pool: I/O Free: 9712 Cause: Not enough free memory
-Process= "Exec", ipl= 0, pid= 3, -Traceback= 0x8082C268 0x8000A2C4 0x80011ACC
0x81AF96AC 0x813AD21C 0x813AD39C 0x8138BD6C 0x8138BC00 0x8138BC2C 0x8138BC2C 0x
8138BC2C 0x8138BC4C 0x8138C634 0x81389880 0x81389924 0x813899AC
*Mar 1 00:58:06.135: %NBAR-2-NOMEMORY: No memory available for StILE lmalloc,
-Traceback= 0x8082C268 0x813AD24C 0x813AD39C 0x8138BD6C 0x8138BC00 0x8138BC2C 0x
8138BC2C 0x8138BC2C 0x8138BC4C 0x8138C634 0x81389880 0x81389924 0x813899AC 0x813
C12A8 0x813CF9E0 0x813B8D00
is this the problem with insufficiant router memory ..i using 2 1700 series router
can some one help on this
Lijesh.N.C
08-19-2008 05:02 AM
Lijesh.N.C
The DRAM requirement for c1700-advsecurityk9-mz.124-11.T.bin is 96MB DRAM and you only have 64MB DRAM.
The following image should fit your router
c1700-advsecurityk9-mz.124-21.bin
HTH,
__
Edison.
Please rate helpful posts
08-19-2008 09:37 AM
Hai Edison,
Wah ....great ,,,, thanks alot ..that was a valiable one ....great once again thanks ..let me try using
c1700-advsecurityk9-mz.124-21.bin
Lijesh.N.C
08-19-2008 09:41 AM
Lijesh.N.C
Please let us know how it works out and mark the thread as resolved if the recommendation fixed your problem.
__
Edison.
08-19-2008 09:42 AM
Hai Edison,
Thanks once again ..will do ASAP
Lijesh.N.C
08-19-2008 08:44 PM
Hai Edison,
I am trying to rate this post i am not able to do ...i am so sorry ... dont knw what is happening ...when i am submitting it not taking ... this has resolved my issue ... let me keep on trying ..
thanks a lot once again
08-19-2008 08:54 PM
THEN i was right when i said in the begining u need to change the ios image !!
cool at least it worked for u now espeacilly with very nice help from Edison
08-19-2008 08:57 PM
hai Marwi,
Thanks a lot for ur help ... ..tooo ....(appolze the late reply )
Lijesh.N.C
08-19-2008 09:32 PM
u welcome..
Please Rate the Helpful Posts
and good luck
08-19-2008 10:58 PM
hai Marwi,
I am trying to rate the post but not taking any one is facing the same issue .???????
Lijesh.N.C
08-20-2008 05:17 AM
Lijesh,
Try accessing the forum via this link
and then you should be able to rate.
Glad I was able to help.
Regards,
__
Edison.
08-20-2008 04:43 AM
Hai Edison,
Ihd been trying to rate for your reply cz it hd solvd my issu ...but unfrtnatly it not taking
MY RATING FOR YOU 5 +
Thanks a lot
Lijesh
08-20-2008 04:44 AM
hai
THanks marvi i am not able to rate ..its not taking
My rating for you 5
Thanks a lot
Lijesh.N.C
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide