We got a lab in class last night. Our teacher wasn't there so we were completelt on our own. I got 2 out of the 3, but this one I'm completely stumped. Am I supposed to make a named access list? We can't make a VLAN on the switch either, it all has to be in the routers.
Thanks for the responses guys. What I don't understand is how you keep the PC on network B from accessing the Web Server A that's also on network B. I doesn't need to go through the router to get to it, so how's an ACL going to stop it?
Nevermind, I see it now. I wasn't seeing the break it down even further and make each node it's own network on the network segment. Thanks a ton guys. I don't know why I didn't see to do that. Greatly appreciated!!!!!!
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...