We have just installed a cisco 6500 and are trying to get our policing working for customers. The DSCP values seem to be getting lost. I have turned on "mls trust dscp" on the links to the core. We are also running MPLS on the core. Would this have an affect?
Here is some config from the switch.
class-map match-any MATCH-INTERNATIONAL
description Match any International Traffic
match ip dscp 5
match ip precedence 5
police cir 2097000 bc 393240 be 393240 conform-action transmit exceed-action drop violate-action drop
police cir 262000 bc 49155 be 49155 conform-action transmit exceed-action drop violate-action drop
description Customer: via Vector Max-3202
ip address 184.108.40.206 255.255.255.240
no ip redirects
no ip proxy-arp
bgp-policy source ip-prec-map
service-policy input CUSTOMER_BWPLAN782_UPLOAD
service-policy output CUSTOMER_BWPLAN782_DOWNLOAD
We are also trying to use BGP table maps to set the dscp on outgoing traffic so we can rate limit international. These don't seem to work either.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.