Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Need recommendation on 3825

Hi,

I'm building a lab at work and I'm hoping to score 2x 3825. However, I'd like at least one of them to have the cards necessary so I could replace a production 3725 incase I need to.

The 3725 is running:

(C3725-ADVIPSERVICESK9-M), Version 12.3(14)T7, RELEASE SOFTWARE (fc2)

and has the following interfaces:

Cisco 3725 (R7000) processor (revision 0.1) with 196608K/65536K bytes of memory.

Processor board ID JMX0727L060

R7000 CPU at 240MHz, Implementation 39, Rev 3.3, 256KB L2 Cache

2 FastEthernet interfaces

1 Serial interface

1 HSSI interface

2 Channelized T1/PRI ports

DRAM configuration is 64 bits wide with parity disabled.

55K bytes of NVRAM.

62592K bytes of ATA System CompactFlash (Read/Write)

62720K bytes of ATA Slot0 CompactFlash (Read/Write)

What cards and license would I need for the 3825 to replace this?

Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Need recommendation on 3825

Hi, a wic-1t, nm-hssi or t3, and vwic or vwic2 will do.

Hope this helps, if please rate post!

1 REPLY
Hall of Fame Super Gold

Re: Need recommendation on 3825

Hi, a wic-1t, nm-hssi or t3, and vwic or vwic2 will do.

Hope this helps, if please rate post!

101
Views
0
Helpful
1
Replies