Re: Need to reserve bandwidth when certain IP in use
Might be done easily (depending on interface type) to do outbound with CBWFQ; issues doing inbound. Inbound best done on far side's outbound. Special consideration when working with "cloud" WANs, e.g. frame-relay, ATM, MPLS; i.e. what happens within cloud.
For CBWFQ approach, first identify Polycom traffic, within a class-map. Can be done many different ways, one of which might be using ToS markings if Polycom marks its traffic.
Second define policy map reserving 384 (or same %).
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...