Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Needing to give a Noob access to shut/no shut a port

I need to give a non-technical person the ability to disconnect remote access into his network. Short of putting a big red flag on the cable for him to unplug; how about setting up views on the router in question, turning on https, and in his view allow only access to the one port through https?

Any other ideas? Is there an API available that we could right our own inhouse web page with a big-a$$ slider switch for on/off access to this network?

TIA for any other ideas.

BTW, just pulling the cable does seem like the best route for this....

Lee

3 REPLIES
Hall of Fame Super Bronze

Needing to give a Noob access to shut/no shut a port

You can create a menu and associate a local user with autocommand feature to call that menu:

http://www.cisco.com/en/US/docs/ios/12_2/configfun/configuration/guide/fcf004.html#wp1001601

Regards,

Edison

Needing to give a Noob access to shut/no shut a port

You got my brain churning with this one. You could probably do it with Perl, Expect, EEM/TcL, even SNMP. Since your talking website intergration Perl might be the easiest. I'll look through my script respository...

New Member

hello,i have also similar

hello,

i have also similar problem like this, i want to create guest user such that he may only shut/unshut one port only..

Kindly help me out with this.

 

 

201
Views
0
Helpful
3
Replies