Trying to troubleshoot an issue we are having with high utilisation of a client internet conneciton. Site A and B are linked with a site-to-site VPN connection, IPSEC, both with C877W's. On Dialer0 and BVI1 we have ip flow ingress (manageengine technician changed it to this. If we look at the traffic reports we can see that traffic to BVI1 is being captured from the site B (remote site). If I look at the total in and out for 3 days it adds up to about 1.5gb, if however I look at dialer0+virtual access 2 I see that the usage is 13gb with 11gb of that being esp traffic to the external ip of site B. Now I appreciate that the traffic is encrypted so I wouldn't see it but I would have thought that as I see some traffic between A and B on the internal address that I would also capture the large amount of traffic. Any thoughts as to why I can't see this?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...