I'm new to cisco 887 routers, I seem to have successfully setup dhcp and can connect to it with a workstation.
The 887 can ping internet hosts and telnet to internet hosts but the dhcp workstations cannot.
Can some please help me see my mistake.
10.10.10.0 Vlan1 FE1,2,3 to Vlan10 220.127.116.11 to FE0 Routes to 18.104.22.168 Internet router( internet )
My config follows:
! version 15.0 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname yourname ! boot-start-marker boot-end-marker ! logging buffered 51200 warnings ! no aaa new-model memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-330327606 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-330327606 revocation-check none rsakeypair TP-self-signed-330327606 ! ! crypto pki certificate chain TP-self-signed-330327606 certificate self-signed 01 nvram:IOS-Self-Sig#4.cer ip source-route ! ! ip dhcp excluded-address 10.10.10.1 ! ip dhcp pool ccp-pool import all network 10.10.10.0 255.255.255.248 default-router 10.10.10.1 lease 0 2 ! ! ip cef no ip domain lookup ip domain name yourdomain.com no ipv6 cef ! ! license udi pid CISCO887-K9 sn FTX151601PN ! ! vtp mode transparent
username name privilege 15 secret 5 $1$o49Z$KzpiJQjgR5VYyTP2ADUKY. ! ! vlan 10 ! ! ! ! ! ! ! ! interface BRI0 no ip address encapsulation hdlc shutdown isdn termination multidrop ! interface ATM0 no ip address no atm ilmi-keepalive ! interface FastEthernet0 switchport access vlan 10 ! interface FastEthernet1 ! interface FastEthernet2 ! interface FastEthernet3 ! interface Vlan1 description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$ ip address 10.10.10.1 255.255.255.248 ip nat inside ip virtual-reassembly ip tcp adjust-mss 1452 ! interface Vlan10 description Public Internet ip address 22.214.171.124 255.255.0.0 ip nat outside ip virtual-reassembly ! ip forward-protocol nd ip http server ip http access-class 23 ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ip nat inside source list NAT interface Vlan10 overload ip route 0.0.0.0 0.0.0.0 126.96.36.199 ip route 10.10.10.0 255.255.255.248 188.8.131.52 ! access-list 23 permit 10.10.10.0 0.0.0.7 no cdp run
! ! ! ! ! control-plane !
! line con 0 login local no modem enable line aux 0 line vty 0 4 access-class 23 in privilege level 15 login local transport input telnet ssh ! scheduler max-task-time 5000 end
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...