Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

NEXUS 5596 Layer 3 module failure N55-M160L3-V2

Hello,

loss of connectivity appears during 2 minutes when layer 3 module N55-M160L3-V2 is detaching from 5596.

Reasons seems that vlan interface are still up, and hsrp also, and chassis take 2 minutes to detect the failure.

Tracking should not help for HSRP as vlan interfaces are still up.

Poweroff module doesn't work in CLI for N55-NM, 5596 is in n5000-uk9.5.1.3.N1.1a

Does anyone have an idea ?

Thanks,

BR,

2 REPLIES
New Member

NEXUS 5596 Layer 3 module failure N55-M160L3-V2

I finally get a reply from CISCO, the module is not hot swappable in the current release (may 2012).

So I confirmed also that for the moment there is no command to shutdown the layer module.

The only way is to shutdown the router and detach the module after.

BR,

Cisco Employee

NEXUS 5596 Layer 3 module failure N55-M160L3-V2

Here is the bug which specifies that the L3 module is not hot swappable and to correct the documentation error you may have seen.

https://tools.cisco.com/bugsearch/bug/CSCuc78675/?reffering_site=dumpcr

1852
Views
0
Helpful
2
Replies
CreatePlease login to create content