I have posted on storage networking forum already about the issue but none has replied. So thought of posting in this forum.
1st thing i want to know is the difference between shared and permanent intreface membership in a VDC. Actually how they play if the interface is shared between two VDC? Specially when one is storage VDC and one is networking.
I just have created a storage VDC and shared some interface members with the default VDC. But unable to turn on priority flow control for the interfaces in the storage VDC. Error shown is given below. Just looking for an explanation. If any white paper or some documents available for deploying FCoE using Nexus 7000 will be helpful. How do we do ETS bandwidth management in Nexus 7000 for FCoE?
fcoe-dvt(config-if)# priority-flow-control mode auto
ERROR: pfc config not allowed on shared interface (0x1a000000)
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...