Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

nm-1a-oc3-pom usage of lx sfp

i have a port adapter nm-1a-oc3-pom with a sfp-oc3-mm i need sm sfp. May i use a 1000base-lx sfp instead ?

2 ACCEPTED SOLUTIONS

Accepted Solutions

Re: nm-1a-oc3-pom usage of lx sfp

Hi,

You can not use the 1000 base-lx sfp on this module.

Following are the supported SFPs -

SFP-OC3-MM

SFP-OC3-IR1

SFP-OC3-LR1

From this compatibility doc - http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6980.html

If you want the sfp to support a higher distance then look at IR (15km) or LR (40km) SFPs mentioned above.

-> Sushil

Hall of Fame Super Silver

Re: nm-1a-oc3-pom usage of lx sfp

Hello Pierre,

as explained by Sushil you need specific SFP, because a 1000 base lx is designed for gigabit ethernet so they use different line codes and modulations techniques.

Hope to help

Giuseppe

2 REPLIES

Re: nm-1a-oc3-pom usage of lx sfp

Hi,

You can not use the 1000 base-lx sfp on this module.

Following are the supported SFPs -

SFP-OC3-MM

SFP-OC3-IR1

SFP-OC3-LR1

From this compatibility doc - http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6980.html

If you want the sfp to support a higher distance then look at IR (15km) or LR (40km) SFPs mentioned above.

-> Sushil

Hall of Fame Super Silver

Re: nm-1a-oc3-pom usage of lx sfp

Hello Pierre,

as explained by Sushil you need specific SFP, because a 1000 base lx is designed for gigabit ethernet so they use different line codes and modulations techniques.

Hope to help

Giuseppe

167
Views
0
Helpful
2
Replies