Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

NM-1CE1B in 2800 chassis?

Does anyone know for sure whether the older NM-1CE1B ISDN primary rate works in a 2800 series chassis, or do I have to update to a NM-1CE1T1-PRI?

Conversely, does the newer NM-1CE1T1-PRI work in the 2600 series chassis?

Kevin Dorrell

Luxembourg

  • WAN Routing and Switching
1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: NM-1CE1B in 2800 chassis?

Hi Kevin

According to table 3 in this document:

http://www.cisco.com/en/US/products/ps5854/products_qanda_item0900aecd80169bd6.shtml

NM-1CE1B is not supported in 2800 series

3 REPLIES

Re: NM-1CE1B in 2800 chassis?

Anyone?

I found half an answer to my second question: yes an NM-1CE1T1-PRI does work in a 2600XM chassis. http://www.cisco.com/application/pdf/en/us/guest/products/ps5855/c1031/cdccont_0900aecd8019dc1f.pdf page 120. However, it does not tell me if it works in the non-XM chassis.

I stil do not know if the MN-1CE1B works in a 2800 chassis. Anyone?

Kevin Dorrell

Luxembourg

Silver

Re: NM-1CE1B in 2800 chassis?

Hi Kevin

According to table 3 in this document:

http://www.cisco.com/en/US/products/ps5854/products_qanda_item0900aecd80169bd6.shtml

NM-1CE1B is not supported in 2800 series

Re: NM-1CE1B in 2800 chassis?

Thanks, that is exactly what I needed. In fact, that is a very useful altogether.

Kevin Dorrell

Luxembourg

566
Views
0
Helpful
3
Replies