Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

NM-2CE1U vs NM-2CE1B

Hello!

Can you please explain what is the difference between NM-2CE1U and NM-2CE1B?

1 REPLY

Re: NM-2CE1U vs NM-2CE1B

Hi Peter,

NM-2CE1U is Channelized E1/ISDN PRI Unbalanced (75-Ohm) Network Module.

NM-2CE1B is Channelized E1/ISDN PRI Balanced (120-Ohm) Network Module.

Depending on the termination provided by the SP you'll have to decide whether you need to use the balanced or unbalanced module.

This represents the impedance of the termination either 75 ohms or 120 ohms.

http://www.cisco.com/en/US/docs/routers/access/interfaces/nm/hardware/installation/guide/ConntPRI_ps2797_TSD_Products_Module_Installation_Guide.html#wp1022505

-> Sushil

194
Views
0
Helpful
1
Replies
CreatePlease to create content