Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

NM-2W and HWIC-4B-S/T

Hi,

I wanted to confirm if NM-2W supports HWIC-4B-S/T in the WAN slots.

I have conflicting information:

On NM-2W says that it does not support HWIC modules or the module.

http://www.cisco.com/en/US/customer/prod/collateral/routers/ps259/product_data_sheet09186a00801aa71c.html

On specs of the ISDN card, it says

Supported in NM-1FE2W-V2, NM-1FE1R2W, NM-2FE2W-V2, and NM-2W

Can not be inserted into a mixed-media network module

http://www.cisco.com/en/US/prod/collateral/modules/ps5949/data_sheet_c78_439536.html

I am kind of confused.

Can you please assist or anyone had an experience installing these cards on a NM-2W

Thanks,

Ashley

1 REPLY

Re: NM-2W and HWIC-4B-S/T

Hi Ashley,

No. It does not supported on NM-2W. Please see the note at the beginning of table 2 in the below link..

http://www.cisco.com/en/US/partner/docs/routers/access/interfaces/nm/hardware/installation/guide/OvrNetM.html

(High-density WAN interface cards (HWICs) are not supported on 1- or 2-slot network modules).

With ref to the second link in your posting- The ISDN card specs comparing the NM-4B-S/T (supported by NM-2W) and HWIC-4B-S/T.

hth

MS

408
Views
0
Helpful
1
Replies
CreatePlease login to create content