NMS

[saquib.tandel]

HI

Link_SW1 switch is not reachable from User_VLAN and Server_VLAN, it cannot be added to Network Management Server.

How can configure Link_SW1 switch that it communicates with NMS only but ip subnet of switch should be different then NM.

Link_SW1 is 2950 switch 24 ports.

{ISP1}-------------Internet_RTR1------Link_SW1-------LoadBalancer1------Firewall------L3Switch-----User_VLAN
                                                                               ||--------LoadBalancer2                                ||
                                                                                                                                                        ||
                                                                                                                                                   Server_VLAN
                                                                                                                                                         ++
                                                                                                                                           Network_Management_Server

Thanks ST

[Jigar Dave]

diagram is not clear, can you give it in pdf or jpg format for better understanding and solve it

.

--Jigar

[saquib.tandel]

Hi

Please check the initial post now.