Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

No able to ping peer ip address

Dear Friends,

We are having a STM1 - 155 Mbps link to our provider.

Now I am able to extended ping but not standard ping .

Atul

3 REPLIES
New Member

Re: No able to ping peer ip address

More info is required....what parameters are you changing in the extended ping to make it work? What do the configs for each side of the link look like?

New Member

Re: No able to ping peer ip address

KUIX_2#ping www.yahoo.com

Translating "www.yahoo.com"...domain server (82.145.192.66) [OK]

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 216.109.118.77, timeout is 2 seconds:

.....

Success rate is 0 percent (0/5)

KUIX_2#ping

Protocol [ip]:

Target IP address: www.yahoo.com

Repeat count [5]: 10

Datagram size [100]:

Timeout in seconds [2]:

Extended commands [n]: y

Source address or interface: 62.216.146.145

% Invalid source

Source address or interface: 62.216.146.146

Type of service [0]:

Set DF bit in IP header? [no]:

Validate reply data? [no]:

Data pattern [0xABCD]:

Loose, Strict, Record, Timestamp, Verbose[none]:

Sweep range of sizes [n]:

Type escape sequence to abort.

Sending 10, 100-byte ICMP Echos to 216.109.118.77, timeout is 2 seconds:

!!!!!!!!!!

Success rate is 100 percent (10/10), round-trip min/avg/max = 280/280/284 ms

KUIX_2#

Silver

Re: No able to ping peer ip address

Is it possible to show the route for yahoo.com and the config on the router if possible.

106
Views
0
Helpful
3
Replies