Hi Pros,
I m getting the below error message in a router:
*May 20 09:50:04.503: %LINK-3-UPDOWN: Interface BRI3/0:1, changed state to up
*May 20 09:50:04.503: BR3/0:1 PPP: Using dialer call direction
*May 20 09:50:04.503: BR3/0:1 PPP: Treating connection as a callout
*May 20 09:50:04.503: BR3/0:1 PPP: Phase is ESTABLISHING, Active Open
*May 20 09:50:04.503: BR3/0:1 PPP: No remote authentication for call-out
*May 20 09:50:04.503: BR3/0:1 LCP: O CONFREQ [Closed] id 255 len 10
*May 20 09:50:04.503: BR3/0:1 LCP: MagicNumber 0x37BCBB63 (0x050637BCBB63)
*May 20 09:50:04.679: Mu1 PPP: O pkt type 0x0021, datagramsize 66
*May 20 09:50:05.563: BR3/0:1 PPP: I pkt type 0xC021, datagramsize 33 link[ppp]
*May 20 09:50:05.563: BR3/0:1 LCP: I CONFREQ [REQsent] id 1 len 29
*May 20 09:50:05.563: BR3/0:1 LCP: MRU 1514 (0x010405EA)
*May 20 09:50:05.563: BR3/0:1 LCP: AuthProto PAP (0x0304C023)
*May 20 09:50:05.563: BR3/0:1 LCP: MagicNumber 0x75D7B878 (0x050675D7B878)
*May 20 09:50:05.563: BR3/0:1 LCP: PFC (0x0702)
*May 20 09:50:05.563: BR3/0:1 LCP: ACFC (0x0802)
*May 20 09:50:05.563: BR3/0:1 LCP: MRRU 1514 (0x110405EA)
*May 20 09:50:05.563: BR3/0:1 LCP: EndpointDisc 0 Null (0x130300)
*May 20 09:50:05.563: BR3/0:1 LCP: O CONFREJ [REQsent] id 1 len 8
*May 20 09:50:05.563: BR3/0:1 LCP: MRRU 1514 (0x110405EA)
*May 20 09:50:05.587: BR3/0:1 PPP: I pkt type 0xC021, datagramsize 26 link[ppp]
*May 20 09:50:05.587: BR3/0:1 LCP: I CONFREQ [REQsent] id 2 len 22
*May 20 09:50:05.587: BR3/0:1 LCP: MRU 1514 (0x010405EA)
*May 20 09:50:05.587: BR3/0:1 LCP: AuthProto PAP (0x0304C023)
*May 20 09:50:05.587: BR3/0:1 LCP: MagicNumber 0x75D7B878 (0x050675D7B878)
*May 20 09:50:05.587: BR3/0:1 LCP: PFC (0x0702)
*May 20 09:50:05.587: BR3/0:1 LCP: ACFC (0x0802)
*May 20 09:50:05.587: BR3/0:1 LCP: O CONFACK [REQsent] id 2 len 22
*May 20 09:50:05.587: BR3/0:1 LCP: MRU 1514 (0x010405EA)
*May 20 09:50:05.587: BR3/0:1 LCP: AuthProto PAP (0x0304C023)
*May 20 09:50:05.587: BR3/0:1 LCP: MagicNumber 0x75D7B878 (0x050675D7B878)
*May 20 09:50:05.587: BR3/0:1 LCP: PFC (0x0702)
*May 20 09:50:05.587: BR3/0:1 LCP: ACFC (0x0802)
*May 20 09:50:06.491: BR3/0:1 LCP: TIMEout: State ACKsent
*May 20 09:50:06.491: BR3/0:1 LCP: O CONFREQ [ACKsent] id 0 len 10
*May 20 09:50:06.491: BR3/0:1 LCP: MagicNumber 0x37BCBB63 (0x050637BCBB63)
*May 20 09:50:06.515: BR3/0:1 PPP: I pkt type 0xC021, datagramsize 14 link[ppp]
*May 20 09:50:06.515: BR3/0:1 LCP: I CONFACK [ACKsent] id 0 len 10
*May 20 09:50:06.515: BR3/0:1 LCP: MagicNumber 0x37BCBB63 (0x050637BCBB63)
*May 20 09:50:06.515: BR3/0:1 LCP: State is Open
*May 20 09:50:06.515: BR3/0:1 PPP: Phase is AUTHENTICATING, by the peer
*May 20 09:50:06.515: BR3/0:1 PAP: Using hostname from interface PAP
*May 20 09:50:06.515: BR3/0:1 PAP: Using password from interface PAP
*May 20 09:50:06.515: BR3/0:1 PAP: O AUTH-REQ id 17 len 38 from "istestmaa1@corp.sify.com"
*May 20 09:50:10.503: %ISDN-6-CONNECT: Interface BRI3/0:1 is now connected to 28210160
**May 20 09:50:16.507: BR3/0:1 AUTH: Timeout 1
*May 20 09:50:16.507: BR3/0:1 PAP: Using hostname from interface PAP
*May 20 09:50:16.507: BR3/0:1 PAP: Using password from interface PAP
*May 20 09:50:16.507: BR3/0:1 PAP: O AUTH-REQ id 18 len 38 from "istestmaa1@corp.sify.com"
*May 20 09:50:16.543: BR3/0:1 PPP: I pkt type 0x0A02, datagramsize 19 link[illegal]
*May 20 09:50:16.543: BR3/0:1 : Non-NCP packet, discarding
PPP connection is terminated because of the error message " Non-NCP packet discaring".
I would like to know what is the cause of this error message and any workaround to solve it.
thanks in advance
arun kumar
