interface GigabitEthernet0/0 description ***** LAN_XXXL ***** ip address 172.16.33.12 255.255.254.0 secondary ( Local IP ) ip address XXX.XXX.XXX.225 255.255.255.240 ( Public Ip ) ip flow ingress ip nat inside ip virtual-reassembly in duplex auto speed auto
Router has public ip as primary ip on LAN interface and it has secondary ip address of Vlan 1.
From core switch im able to ping router secondary ip but from VLAN 3 machine im not able to ping router secondary ip.
My ping tracert drops at core.
In show ip route 172.16.32.0 /23 shows as connected route on both router and core switch.
ip nat inside source list 1 interface GigabitEthernet0/2 overload ip route 0.0.0.0 0.0.0.0 xxx.xxx.xxx.193 ( public IP ) ip route 10.64.112.0 255.255.254.0 172.16.33.1 ip route 172.16.16.0 255.255.248.0 172.16.33.1 ip route 172.16.24.0 255.255.248.0 172.16.33.1 ip route 172.16.32.0 255.255.240.0 172.16.33.1 ip route 172.16.48.0 255.255.240.0 172.16.33.1
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...