Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

not able to use "set"command user policy-map

Please see the example I did:

R1(config)#class-map class1

R1(config-cmap)#match ip pre flash

R1(config-cmap)#exit

R1(config)#policy-map example1

R1(config-pmap)#class class1

R1(config-pmap-c)#set

^

% Invalid input detected at '^' marker. 《-------

R1(config-pmap-c)#?

QoS policy-map class configuration commands:

bandwidth Bandwidth

exit Exit from QoS class action configuration mode

no Negate or set default values of a command

police Police

priority Strict Scheduling Priority for this Class

queue-limit Queue Max Threshold for Tail Drop

random-detect Enable Random Early Detection as drop policy

service-policy Configure QoS Service Policy

shape Traffic Shaping

The problem is, I am not able to use the SET command.

And the following is my IOS version and router model:

R1#sh ver

Cisco Internetwork Operating System Software

IOS (tm) 2500 Software (C2500-JS-L), Version 12.2(31), RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2005 by cisco Systems, Inc.

Compiled Thu 11-Aug-05 14:38 by tinhuang

Image text-base: 0x0307D4A0, data-base: 0x00001000

ROM: System Bootstrap, Version 11.0(10c)XB2, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)

BOOTLDR: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XB2, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)

R1 uptime is 1 hour, 18 minutes

System returned to ROM by power-on

System image file is "flash:c2500-js-l.122-31.bin"

cisco 2500 (68030) processor (revision L) with 14336K/2048K bytes of memory.

Processor board ID 13613775, with hardware revision 00000000

Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp).

TN3270 Emulation software.

2 Ethernet/IEEE 802.3 interface(s)

2 Serial network interface(s)

32K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102

I did search from the cisco website, the SET command is avaliable since 12.2.15T, how come I am not able to use it on my router?

2 REPLIES

Re: not able to use "set"command user policy-map

What parameter do you want to set for this class ?

New Member

Re: not able to use "set"command user policy-map

the problem is not which parameter I want to config, it is I am not able to use "SET".

I am practising the lab, not real work.

89
Views
0
Helpful
2
Replies