cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
524
Views
4
Helpful
3
Replies

NTP

Rupesh Kashyap
Level 1
Level 1

hi,

My NTP cisco switch-A (Server) is on PST. I have configured Sw-B to take time from Sw-A, but there is no packet for NTP on Sw-B. I have enabled debugging on Sw-B. Please help.

access-list 47 permit 10.80.95.1

access-list 47 deny any log

ntp server 10.80.95.1

clock timezone CST -5

clock summer-time CDT recurring

clock calendar-valid

ntp access-group peer 47

ntp source Vlan999

3 Replies 3

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Rupesh,

as first step verify if there is IP connectivity between Vlan999 ip address and 10.80.95.1.

Does switch-A knows how to reach vlan999 ip address?

sh ip route vlan999.ipaddress on switchA what tells you?

there is any firewall on the path?

Hope to help

Giuseppe

thanks, The problem is solved. Switch-N is Nexus which is not supporting NTP server feature.

Hello Rupesh,

thanks frou your feedback

Best Regards

Giuseppe

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card