Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Object Tracking EVDO and then dial?

I want to see a config if anyone has one that can track a primary path and fail over to secondary path and if secondary path is down fail over to dial backup. The routing is tricky and I cannot figure it out. Anyone done this yet?

I have configs that do both well (primary to secondary (EVDO) and Primary to dial backup) but I need to combine. Anyone do an sla tracking another sla?

1 REPLY
Community Member

Re: Object Tracking EVDO and then dial?

hi jerry,

interface serial 0

ip address 172.16.162.2 255.255.255.0

no shut

interface serial 1

ip address 10.16.162.2 255.255.255.0

no shut

int bri 0

ip address negotiated

encapsulation ppp

dialer idle-timeout 300

dialer string xxxxxxx

dialer-group 1

isdn switch-type basic-net3

priority-group 1

ppp pap sent-username xxxxx password xxxxx

ip route 198.16.162.0 255.255.255.0 172.16.162.1 (primary)

ip route 198.16.162.0 255.255.255.0 10.16.162.1 50 (secondary -floating)

ip route 198.16.162.0 255.255.255.0 bri 0 100 (bri - floting)

will this work ?

Rajeev.S

113
Views
0
Helpful
1
Replies
CreatePlease to create content