10-31-2011 01:51 AM - edited 03-04-2019 02:06 PM
Hello
I'm going to replace a Cat6513 with a Nexus 7018. In my Cat6513, there are object tracking config as follows:
ip sla monitor 1
type echo protocol ipIcmpEcho 112.78.254.249
timeout 3000
frequency 6
ip sla monitor schedule 1 life forever start-time now
ip route 172.17.7.0 255.255.255.0 165.202.51.46 name VPN-1 track 123
Is there similar feature in Nexus platform? Because from Nx-OS command ref, I only found:
ip route ip-prefix/mask {[interface] next-hop} [preference] [tag id]
Seems can't associate a track object to a static route in Nx-OS??
Thanks.
11-02-2011 11:29 PM
Hello,
IP-SLA support on the Nexus 7000 with sender/responder functionality and most common
probes are planned for the Freetown release 6.2 . I think that is expected in summer 2012.
Hope this helps,
Nik
11-02-2011 11:45 PM
Thanks very much!
11-03-2011 04:48 AM
No Problem,
You can rate if was helpful for it to be useful in future.
Nik
11-22-2012 07:33 AM
Hmm, now on version 5.2(7) and still no sign of object tracking in this code.
03-26-2018 03:34 AM
Hello ADRIAN KAM,
Object Tracking in Nexus 7000 Platform
CLI for object tracking in catalyst switch differs from CLI of NX-OS , for configuring object tracking in NX-OS make sure that you are in correct VDC.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide