Is there an OC3 interface available for the 3945 ISR2 for a full OC3/155Mb IP WAN port? I am familiar with the PA-POS-1OC3 Packet/SONET Module that I have used on 7000 series but this appears incompatible with the 3900's. The only 3900 OC3 module I see is the NM-1A-OC3-POM which states it is an ATM Module. My WAN interface will be IP only, no ATM. Is there another option?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...