Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

OER Master Controller Memory Error

I am getting below error on MC (every 30 seconds), the moment I  configure second Border Router. This seems to be a memory issue but  trying to understand the actual cause and the remedy. Due to this error,  second Border Router doesn't come in Active state.

Router(config)#
*Mar  1 00:17:16.459: %SYS-2-MALLOCFAIL: Memory allocation of 2097152 bytes failed from 0x6238773C, alignment 0
Pool: Processor  Free: 2074564  Cause: Not enough free memory
Alternate Pool: None  Free: 0  Cause: No Alternate pool
-Process=  "OER Master Controller", ipl= 0, pid= 195,  -Traceback= 0x61488C44  0x60015E58 0x6001BDB8 0x6001C2C4 0x62387744 0x623D6A68 0x62390B38  0x62B1AED8 0x62B1AEBC
R4(config)#

Router(config)#do sh ver
Cisco IOS Software, 3700 Software (C3745-ADVENTERPRISEK9-M), Version 12.4(15)T14, RELEASE SOFTWARE (fc2)

I am using this image on GNS3. I tried these commands using other IOS  and that works fine. Want to use this IOS 12.4(15)T14, as other IOS do  not support match traffic-class command under oer-map.

Kindly advice,

Thanks,

340
Views
0
Helpful
0
Replies