Hi All,
I am looking for a way to get the configured BW policy for a VLAN.
Let me take an example of below configuration. I have a VLAN configured with service police 30Mbps. Like wise there are 100 VLANs in the router, need to get the configured BW policy for each vlan through SNMP. Please suggest:
interface Vlan100
description ** Customer1 **
ip address 10.0.0.2 255.255.255.240
ip flow ingress
load-interval 30
mls netflow sampling
standby 30 ip 10.0.0.1
standby 30 preempt
service-policy input 30_Mbps
service-policy output 30_Mbps
end
Router1#show policy-map interface vlan 100
Vlan100
Service-policy input: 30_Mbps
class-map: 30_Mbps (match-all)
Match: access-group name ACL_Customer
police :
30000000 bps 5625000 limit 5625000 extended limit
<Output Ignored>
Service-policy output: 30_Mbps
class-map: 30_Mbps (match-all)
Match: access-group name ACL_Customer
police :
30000000 bps 5625000 limit 5625000 extended limit
<Output Ignored>
