order of operations (input CB Marking + wccp "in" + PBR)
Given the following piece of IOS interface configuration
ip policy route-map MYMAP
ip wccp 90 redirect in
service-policy input MYPOLICY
It is my understanding that the expected order of operations will be:
Input Class-based marking
then inbound WCCP
then Policy-based routing
Since I do not have a Content Engine to play with, I would like to know if my assumptions are right or not. I do not know if WCCP is executed before CB Marking or the opposite.
I read "QoS order of operations" and "NAT order of operations" and it is really not clear to me which operation comes first. Since WCCP can be applied in any of the directions, I do not know which case this document is explaining.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...